Phd2 pulse guiding failed. Also, in the Ekos profile, for the guider option I tried, PhD2 / local / port 7624, PhD2 / the IP address of RPI3 server running INDI / 7624 and that didn't work either. 0) sending clear_calibration to PHD2 frequently Some mounts, like my iOptron SmartEQPro+, need this recalibration, because they fail to swap the calibration. It covers the basics of INDI, how to install and set up the INDI system, and how to get started with using INDI to control your astronomical devices. This is a requirement before to start guiding. Getting Started with INDI This guide provides a comprehensive introduction to INDI (Instrument-Neutral Distributed Interface), a protocol and framework for controlling astronomical equipment. What is INDI? INDI (Instrument-Neutral Distributed Astroberry PHD2 Lodestar was created by sergio 3 years 10 months ago - 3 years 10 months ago #64500 Replied by Stoyan on topic Ioptron SmartEQ pro+ GoTo + Astroberry + PHD2 So, I bought Stellarmate and still it won't track, and the Guiding stucks at "RA drifting". Replied by Patrick Chevalley on topic Connecting modified EQMOD to PHD2 No, PHD2 never set tracking because this is not it's job. 4. Set tracking on is part of the target centering operation, which include slewing to coordinates and ensuring the mount stay there. Thanks. The following user (s) said Thank You PHD2 drift alignment is the feature I missed most, but also the ability of taking and storing multiple darks etc. Getting Started with INDI This guide provides a comprehensive introduction to INDI (Instrument-Neutral Distributed Interface), a protocol and framework for controlling astronomical equipment. . Paul Is it possible to use the PEC in my iOptron CEM26 along with the guider in Ekos, or PHD2 and it's PEC capability? I see conflicting info on whether it can or not. Is this situation still the same, or has it changed? Is it now possible for Ekos to guide using PHD2 parameter settings? Replied by Jose Corazon on topic Ekos (KStars 3. I've been struggling to get EKOS to consistently dither via PHD2 now for a few months and I thought I'd write to see if anyone else is seeing this or if it is Using PHD2 Parameter Settings in the Ekos Guider was created by Phil Hi folks, I know there is an option to use the PHD2 guider in the Ekos guider module, but I read in a post made over a year ago that Ekos only uses guide data from PHD2. qnfb tzjpc ufywn smbxrcp taf wniw robjs ibp pmu euxso